Stock abbreviation:Bozhong Group
Stock Code: 210988
MX01
From inquiry to clients’ usage of Bozhong Metal Group’sMX01 , we promise to offer you superior service .Please believe your choice . MX01
MX01 is a steel grade especially developed to achieve specific properties useful to minimize operating cost of forging dies.
The chemical balance of MX01 is designed to achieve improved mechanical properties and die resistance to indentation and wear. The high mechanical properties are maintained at high temperature thanks to an excellent softening resistance. The global die life time will be extended by preserving the dimensional integrity of die cavities and forged pieces on a longer duration than conventional grades.
Hardness and mechanical properties are very consistent throughout dies even in the center of heavy blocks, thanks to Boron addition ensuring an efficient the hardening.
Toughness is also a strong point of MX01. This property is linked also to the chemistry of the grade ensuring a fine distribution of carbides in the matrix. Toughness will provide a good resistance to all phenomena such as chipping, cracking or even failures on the die in hot condition but also during calibration at room temperature.
The chemical balance of MX01 is designed to achieve improved mechanical properties and die resistance to indentation and wear. The high mechanical properties are maintained at high temperature thanks to an excellent softening resistance. The global die life time will be extended by preserving the dimensional integrity of die cavities and forged pieces on a longer duration than conventional grades.
Hardness and mechanical properties are very consistent throughout dies even in the center of heavy blocks, thanks to Boron addition ensuring an efficient the hardening.
Toughness is also a strong point of MX01. This property is linked also to the chemistry of the grade ensuring a fine distribution of carbides in the matrix. Toughness will provide a good resistance to all phenomena such as chipping, cracking or even failures on the die in hot condition but also during calibration at room temperature.
Chemical Analysis
Typical heat analysis (-% Weight).
Mechanical Properties
Delivery Conditions
Dimensional program
MX01 is delivered in pre-hardened condition. It normally requires no further heat treatment. For specific properties, please consult the mill
PDF: http://www.industeel.info/wp-content/uploads/2016/01/DS-TOOLS-MX01.pdf
Typical heat analysis (-% Weight).
| C | Mn | Ni | Cr | Mo | V | Others | |
|
Conventional material |
0.50 | 0.85 | 0.90 | 1.10 | 0.50 | 0.05 | – |
| MX01 | 0.19 | 1.5 | 1.00 | 2.00 | 0.80 | 0.20 | B |
Mechanical Properties
? Delivery condition: MX01 is delivered in
prehardened condition
? Guaranteed hardness: MX01 is prehardened within the range 360/400
HB (38/42 HRC)
? Typical mechanical properties: Measured at room temperature on
375 mm / 14.8’’ thick block
| Hardness (HB) |
YS (MPa/ksi) |
UTS (MPa/ksi) |
Elongation (%) |
Charpy V (J/ft.lb) |
| 382/392 | 1034/150 | 1194/173 | 13 | 22/16 |
Delivery Conditions
Dimensional program
MX01 is delivered in pre-hardened condition. It normally requires no further heat treatment. For specific properties, please consult the mill
| Thickness | Width |
| Up to 500 mm (20″) | Up to 2000 mm (78″) |
PDF: http://www.industeel.info/wp-content/uploads/2016/01/DS-TOOLS-MX01.pdf
Product Catalog